ATTN: MUNICIPALITIES AND TRIBES PLEASE NOTE BELOW
EPA Finalizes Nation’s First Greenhouse Gas Reporting System/Monitoring to Begin in 2010.
States, municipalities, and tribes could be required to submit an annual GHG report if they own or operate facilities subject to the rule. Landfills and stationary combustion equipment are the most likely types of facilities that might trigger applicability. The rule applies to all types of stationary combustion equipment (except for emergency generators and portable equipment) if the aggregate maximum rated heat input capacity of all stationary fuel combustion units at a facility is 30 million British thermal units per hour (mmBtu/hr) or greater, and the facility emits 25,000 metric tons or more of carbon dioxide equivalent (CO2e) per year from all stationary fuel combustion sources. The rule applies to landfills that generate methane in amounts equal to 25,000 metric tons of CO2e or more per year. It also applies to municipal power generation plants that report to the EPA Acid Rain Program or emit 25,000 metric tons or more of CO2e per year. EPA has developed an Applicability Tool to aid entities in assessing whether they are required to report under the rule, which is available at: http://epa.gov/climatechange/emissions/GHG-calculator/index.html.
ARIZONA STATE UNIVERSITY Press Release
August 7, 2009
ARIZONA STATE UNIVERSITY INSTALLS LED LIGHTING IN PARKING STRUCTURES AS PART OF ENERGY CONSERVATION PROJECT
Lighting Science’s energy saving LED luminaires to reduce annual energy consumption by up to 59 percent in six ASU parking structures
TEMPE, Ariz. and SATELLITE BEACH, FL.– Lighting Science Group Corporation (LSG) (Lighting Science) today announced that Arizona State University (ASU) has taken yet another step in its commitment to ‘going green’ by retrofitting six parking structures on the Tempe campus with new light emitting-diode (LED) fixtures. Changing the existing fixtures to Lighting Science’s LED low bay solution will afford ASU with an annual savings of up to $127,000 in energy and maintenance costs for the six structures that were retrofit.
As part of a Phase II energy conservation and sustainability project underway throughout campus, ASU’s partner APS Energy Services replaced over 2,000, 150 W metal halide fixtures with Lighting Science’s 78 W LED low bay luminaires. By replacing existing metal halide fixtures and lamps, ASU will reduce its energy consumption by 1.5 million kW hours, which is equivalent to the annual greenhouse gas emissions from 208 passenger vehicles.
For this environmentally conscious university of nearly 80,000 students, faculty and staff, the lighting replacement project offers a variety of benefits.
“Exploring the value of LED lighting solutions is an important component to ‘greening’ our university,” said Bonny Bentzin, the director of sustainable business practices at ASU. “In addition to the superior level of illumination offered by the LED fixtures, installing energy efficient lighting provides financial and environmental benefits.”
Improving the light quality in a parking facility enables people to better identify pedestrians, other vehicles and obstructions, helping them feel safer. Lighting Science’s pyramid-shaped LED fixtures are made up of 108 light sources, whereby if one light source dims or fails, other light sources remain to provide a reliable level of illumination. The new fixtures are also less costly to maintain because they last 50,000 hours, or approximately three times longer than the typical metal halide fixture they replace.
“APS Energy Services is proud to be a partner with the University in taking yet another step toward their goal of reducing overall energy consumption and its footprint on the environment,” said APS Energy Services’ Sr. Account Executive, Rick Becker.
“We are proud to be a part of Arizona State University’s initiative to employ sustainable, energy efficient technologies throughout the Tempe campus,” said Lighting Science CEO, Zach Gibler. “This project demonstrates that LED lighting is an economically viable, environmentally beneficial, and sustainable lighting alternative.”
About Lighting Science
Lighting Science Group Corporation designs, develops, manufactures and markets LED lighting solutions that are environmentally friendlier and more energy efficient than traditional lighting products. LSG offers retrofit LED lamps in form factors that match the form factor of traditional lamps or bulbs and LED luminaires for a range of applications including public and private infrastructure for both indoor and outdoor applications. LSG’s Custom Solutions business unit designs, develops and manufactures custom LED lighting solutions for architectural and artistic projects. LSG is headquartered in Satellite Beach, Florida; LSG’s Custom Solutions business unit is based in Rancho Cordova, California; LSG’s European operations are based in Goes, The Netherlands; and, LSG has sales offices in Tokyo, Japan, Buckinghamshire, England and Sydney, Australia. For more information about LSG, visit: http://www.lsgc.com
Forward Looking Statements
Certain statements in this press release may constitute “forward-looking statements” made under the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. The statements include, but are not limited to statements regarding our expectations concerning management cohesion and our ability to expand and develop our business and statements using terminology such as “will,” “would,” “could,” “expect,” “intend,” “plan,” “anticipate,” “believe,” “potential,” “opportunity,” “greater,” or “extensive.” Such statements reflect the current view of Lighting Science Group Corporation with respect to future events and are subject to certain risks, uncertainties and assumptions. Known and unknown risks, uncertainties and other factors could cause actual results to differ materially from those contemplated by the statements. In evaluating these statements, you should specifically consider various factors that may cause our actual results to differ materially from any forward-looking statements. Readers should carefully review the risk factors detailed under “Risk Factors” in our Form 10-K’s, Form 10-Q’s and other Securities and Exchange Commission filings. These filings can be obtained by contacting Lighting Science Group Corporation’s Investor Contact.
About APS Energy Services
Headquartered in Tempe, AZ, APS Energy Services is the full-services energy services subsidiary of Pinnacle West Capital Corporation (NYSE:PNW) and has completed energy efficiency and renewable projects throughout the Southwest. APS Energy Services is passionate about the environment and seeks to promote and implement comprehensive energy solutions, while conducting work in a sustainable and environmentally responsible manner. For more information about APS Energy Services, visit http://www.apses.com.
About Arizona State University (ASU)
ASU has a vision to be a New American University, promoting excellence in its research and among its students and faculty, increasing access to its educational resources and working with communities to positively impact social and economic development. Further, ASU is a public institution where sustainability is a fundamental precept underlying its teaching, learning, research, and business missions; it seeks to create meaningful change by producing knowledge resulting in solutions to global problems of sustainability. For more information about ASU, visit: http://www.asu.edu.
About ASU’s Sustainable Business Practices and Campus Sustainability
ASU recognizes that promoting sustainability begins internally with its own business practices and university policy. ASU’s sustainability initiatives, spearheaded by the Global Institute of Sustainability, are advanced by the efforts of people and departments from across the University; leading sustainable practices are addressed and implemented in the areas of energy, water, buildings and grounds, carbon neutrality, food services, transportation, waste and recycling, and, purchasing and policies. For more information about ASU’s sustainable business practices, visit http://sustainability.asu.edu/campus. Follow us on Twitter at ASUGreen.
EPA's New Best Practices Guidebook Promotes State Leadership with Clean Energy
The U.S. Environmental Protection Agency released a first-of-its- kind guide highlighting the steps that states can take to lead the country in the adoption of clean energy in their buildings, facilities, operations, and fleets. These activities save money and reduce greenhouse gas emissions, while growing jobs.
States spend about 10 percent of their operating budgets on energy bills, and these costs can be greatly reduced through adoption of well-designed state energy management and greenhouse gas reduction programs.
EPA's new Clean Energy Lead by Example (LBE) Guide is a powerful information resource that highlights key strategies, resources, and tools to help states identify the suite of options best suited to their needs.
Each of the strategies promoted in the guide is road-tested and cost- effective. The strategies include facility-level energy efficiency, green power purchases, clean distributed generation, and more.
The LBE guide is provided through EPA's State Climate and Clean Energy Program, which assists states in developing and implementing clean energy policies and solutions to climate change.
To download the LBE guide, please visit:
To learn more about EPA's State Climate and Clean Energy Program, please visit:
State and local officials interested in additional information about developing and implementing cost-effective clean energy and environmental strategies that help further environmental and clean energy goals and achieve public health and economic benefits may visit: http://epa.gov/cleanenergy/energy-programs/state-and-local/index.html